PS30SWIV Ham radio base station power supply
Output voltage: 9- 15V DC adjustable, suitable for fixed 13.8V DC
Output Current: 30A (maximum)

Analog to digital interface , This device is used for FT8, SSTV, WISPR, PSK and more

DJ-Dual Patch antenna is used for the QO-100 satellite
it have very low drift and is locked to the beacon in SDR-Radio software
This Unit is Assembled and Tuned - Plug and Play

Dual Band J Pole antenna Great for holidays or home installation.
144-148 and 430-440 (Adjustable)
Connection Standard S0-239 Construction
Aluminium bracket Pole mounting up to 50mm
Mast 100 watts power handling

SPECIFICATIONS :

IMPEDANCE: 50 OHMS VSWR: Less than 1.3:1 at less than 70 Mhz
POWER DISSIPATION: 500 Watts for less than 10 seconds. 100 Watts for more than 180 seconds
OPERATING TEMPERATURE: Up to 75'C
FREQUENCY RANGE: 1-50 MHz; usable to 70 MHz

1. A reciever designed for receiving continuous carrier transmissions.
2. Signal strength detection is from a tone s-meter, not audio volume.
3. Frequency range is 144.500 Mhz - 145.500 Mhz

This is an updated version of a design first published in 2004, but
now using all SMT components.

PCB is Assembled and
Pots, knobs and box are included.

A Simple yet effective 3EL VHF Yagi directional antenna that could
be used for Direction Finding, SOTA, Emergency Communications
and other things that needs an improved antenna for your
handheld transceiver compared to its stock antenna
Sold as a kit

This board can be fitted to Older type radios that does not have 88.5 tone system.
tone of you choice can be set by the radio and with the dip switches.

Full-duplex receiver enables simultaneous TX/RX within 144/440MHz bands as well as V/V and U/U receiver capability.
Features eight full RGB color LEDs enabling you to customize your display colors in the set mode.
Fully independent frequency, audio level and squelch knobs for right and left VFOs make it seem more like operating two monoband radios rather than a dual band transceiver.

The FT-891 HF All Mode Mobile Transceiver once again continues Yaesu's legacy for legendary receiver design in a compact package, providing uncompromised performance for both the mobile and stationary Amateur operator. High end 32-Bit floating point DSP enhances the operating experience providing a cleaner, clearer signal and reducing overall operator fatigue creating a more enjoyable environment for any Amateur operator.

The 100 Watt VX-1400 supports both mobile and base station operations for integrated, affordable long-haul communications. Operating modes include: CW , LSB/USB, FSK/AFSK and AM .

Designed to operate both as a mobile radio or base station for long-haul land mobile communication, the multi-purpose 125-Watt
VX-1700 is the ideal choice for any applications.
Operating modes include LSB/USB , AM and CW

The FT-4XR 2 meter/ 440 MHz HT has three output power levels: 5, 2.5 or 0.5 watts transmitting from 144 to 148 MHz and from 400 to 480 MHz. Receive coverage is 65-108 (FM broadcast band), 136-174 and 400-480 MHz.

The FT-65R is a very compact, ruggedly constructed Handheld VHF/UHF with three selectable power settings 5W / 2.5W / 0.5W allowing each user to select the power they need. The big front speaker provides a full 1 watt of crisp, clear audio quality. The unit comes supplied with a 1950mAh Li-ion battery pack capable of over 9 hours of operation, with an optional higher capacity 2500mAh Li-ion battery for over 11.5 hours of operating time. A 3.5 hour rapid charger comes standard, making the transceiver ready to operate at any time. Our newly designed large white LED displays are vibrant and highly visible. Four Quick Recall Keys (QRK) are user programmable to instantly recall favorite channels with just the push of a button. VOX operation is available with the optional Earpiece Microphone SSM-512B. Other useful features included: versatile scanning capabilities such as Programmable VFO Scan, Memory Scan, Priority Channel Scan, and Weather Alert Scan, WX Channels with “Severe Weather” Alert, PC Programming, Transceiver-to-Transceiver Cloning, FM Broadcast Receiver.

Frequency Range: VHF/UHF 136-174 / 400-520 MHz, Dual-Band Display, Dual-Standby
High/Mid/Low- 8W/4W/1W RF power: busy Channel lock-out(bclo); 128 Channels 50 ctcss and 104 CDCSS; Channel Step: 2.5/5/6.25/10/12.5/25kHz

Programmed with all amateur repeaters

BNC BARREL CONNECTOR

BNC T Connector 1 Male To 2 Female Adapter

N TYPE F TO BNC M SOCKET ADAPTOR

N TYPE F TO SMA Socket

N TYPE PLUG TO UHF SOCKET ADAPTOR

SMA PLUG TO BNC SOCKET ADAPTOR

SMA PLUG TO BNC SOCKET ADAPTOR FLANGE

SMA SOCKET TO BNC SOCKET ADAPTOR

PL-259 BARREL CONNECTOR

BNC FEMALE CRIMP CONNECTOR - RG-58

BNC MALE CRIMP CONNECTOR - RG-58 \\ LMR195

BNC MALE SOLDER CONNECTOR - RG-213 \\ LMR400

BNC MALE SOLDER CONNECTOR - RG-58 \\ LMR195

BNC Connectors - BNC Panel Mount Connectors

N TYPE M - CRIMP PLUG CONNECTOR - RG-123\\LMR400

N TYPE M - CRIMP PLUG CONNECTOR - RG-58\\LMR195

N TYPE M - SOLDER PLUG CONNECTOR-RG-213 / LMR400

N TYPE M - PLUG SOLDER CONNECTOR-RG-58 /LMR-195

N-Typer Connectors - N-Type Panel Mount Connectors

SMA PLUG CRIMP CONNECTOR - RG-58/LMR-195

SMA PLUG CONNECTOR - End fire Female

SMA PLUG CRIMP CONNECTOR - RG-58/LMR-195

SMA PLUG CONNECTOR - End Fire male

SMA PLUG CONNECTOR - UT141

SMA PLUG CONNECTOR UT-086

SMA SOCKET CRIMP CONNECTOR RG-58 / LMR-F195

PL-259 UHF PLUG CRIMP CONNECTOR - RG-213

PL-259 UHF PLUG CRIMP CONNECTOR - RG-58

PL-259 UHF PLUG SOLDER CONNECTOR - RG-213

PL-259 SOLDER CONNECTOR - RG-58/LMR-195

SO-239 Connectors - SO-239 Panel Mount Connectors

Portable self-contained RF module
Cost-effective experimentation platform
Based on Analog Devices AD9363 RF Agile Transceiver
RF coverage from 325 MHz to 3.8 GHz
Up to 20 MHz of instantaneous bandwidth
Flexible rate, 12-bit ADC and DAC
One transmitter and one receiver, half or full duplex
MATLAB®, Simulink® support
GNU Radio sink and source blocks
libiio, a C, C++, C#, and Python API
USB 2.0 Powered Interface with Micro-USB 2.0 connector
High quality plastic enclosure

A panadapter allows you to see all of the radio stations currently transmitting across an entire band. When working HF, this is very useful as it allows you to quickly home in on CQ calls and other activity.

SDR radios are relatively cheap and available, these will provide a spectrum view right out of the box.

This RTL-SDR USB stick features the Realtek RTL2832U chipset and the new R820T2 tuner specifically designed for use in SDR mode.

The new R820T2 tuner offers better sensitivity (+ 2dB to 5dB) and a low noise compared to the previous R820T version.

Used with a SDR software, this becomes a scanner, broadband receiver from 24 MHz to 1766 MHz (without gap) and all modes (AM, FM, SSB, CW, DATA, ADSB, DMR) with the appropriate software.
Including a small mag antenna